How to Use Android Phone As Biometric Device

Spread the love

Just think, if you can use an android phone for your biometric project how cool it will be? You can take it anywhere you want, perform remote biometric enrollment and identification on the field.  

I am sure you had thought about this so many times but couldn’t figure out how to do that. Would you believe me if I said it is super easy? You can scan biometric on an Android device from anywhere you want to register and identify someone. Here’s how you can achieve it:

How to Use Android Phone as Biometric Device

Why Should You Use Android Phone As Biometric Device

The answer is pretty simple. You need an android phone because it is easy to carry. It is flexible, and you can use it anywhere you want. The operating system is very common, and as a result, it is easy to use for any biometric enrollment and identification project.

The Android Mobile Device

 Not all android phones can perform biometric scans to register or identify someone. This is mostly because of lack of permission provided by the Android operating system and lack of compatibility between different biometric sensors used by different manufacturers and your matching engine’s quality requirement. Besides, regular fingerprint sensor found in today’s smartphones are only good for unlocking your phone. However, to perform sophisticated biometric registration and to identify someone’s identity from your database, you will need a particular android phone with a high-quality biometric scanner that can save biometric data according to the requirement of your matching engine.

M2SYS have 3 android phones and 1 tablet that is perfect for any biometric identification or enrollment project. These devices are

MULTICHECK-E™

MULTICHECK-E™- how to use android phone as biometric device

 

Multicheck-E is the newest addition of M2SYS. MULTICHECK-E™ is powered by FBI FAP20 certified Suprema fingerprint sensor with 500 DPI and image capture speed of up to 6 ms. You can get exceptional fingerprint image quality even under extreme direct light condition up to 100,000 LUX with this device. Not only that this device comes with an 8MP autofocus camera with Sony Image Sensor, Osram Infrared LED and flashlight gives you clear iris scanning result. Moreover, you can grab high-quality dual iris images and identify individuals with a fantastic accuracy of FRR: less than 0.1% & FAR: less than 0.0001%.

Specification

Supports: Fingerprint, Finger vein, Iris and Facial Recognition
Scan: NFC and RFID
Operating System: Android 5.1
Processor: 64 bit
Display: 5” Touch Screen
Connectivity: Bluetooth, Wifi, GSM & WCDMA networks.
Battery: 5,000mAh Li-on battery

Extra Benefits

Anti-spoofing technology

Rugged build design

Lightweight

MULTICHECK-C™

MULTICHECK-C™ - How to Use Android Phone as Biometric Device

The MULTICHECK-C™ biometric device is built with a rugged, shockproof, and dustproof design for both industrial and field level use. It can withstand nearly any kind of weather condition in every part of the world. It also comes with fast and stable 4G, WiFi, Bluetooth connectivity to meet your network needs both indoors and outdoors.

Specification

Supports: Fingerprint, Iris and Facial Recognition
Scan: NFC and 1D/2D barcodes
Operating System: Android 6.0 OS
Processor: 64 bit
Display: 5.2″ Touch Screen
Connectivity: 2G, 3G, 4G, Wifi & Bluetooth
Battery: 5,000mAh battery

Extra Benefits

Direct light resistant design

 Liveness & Spoof Detection Capability

LED display visual feedback

RapidCheck™

RapidCheck™- How to Use Android Phone as Biometric Device

RapidCheck™ is a portable fingerprint device can be delivered with either an optical or capacitive fingerprint sensor. If you are looking for a more sleek and lightweight device, there is also an ultra-slim version of the fingerprint scanner available. This device can capture fingerprint images in ISO/ ANSI formats and is fully compatible with the M2SYS biometric software suite for data capture and identification.

Specification

Supports: Fingerprint
Scan: NFC, RFID, Barcode
Operating System: Android 5.1
Processor: 64 bit
Display: 5-inch multi-level capacitive touchscreen
Connectivity: 2G, 3G, 4G, Wifi & Bluetooth
Battery: 6000 mAh battery

Extra Benefits

Fingerprint, Barcode, NFC and RFID Scanner

 A wide range of fingerprint sensors to choose from

 ISO/ANSI standard fingerprint images

MultiTab™

MultiTab™-How to Use Android Phone as Biometric Device

 

MultiTab™ is a portable biometric tablet that is packed with features to meet your diverse biometric enrollment and identification project needs. The device is equipped with a reliable fingerprint and iris camera to capture high-quality images and includes a stunning 8-inch HD display. BioTablet™ also supports various communication methods, including GPRS, 3G, 4G LTE, WIFI and Bluetooth, and is packed with a massive 8000mAh battery.

Specification

Supports: Fingerprint, Iris and Facial Recognition
Scan: NFC, RFID, IC Card
Operating System: Android 5.1
Display: 8 inches 1280*800
Connectivity: GPRS, 3G, 4G, LITE, WIFI
Battery: 8000 mAh battery

Extra Benefits

Powerful device

Anti-Spoofing & Liveness Detection Capability

Capture biometric data and display matching results with maximized performance and flexibility

The Biometric App

Now that you have a device to perform your biometric enrollment project, it’s time to get an app for it. Don’t worry; you do not need to hire any app developers for that. You can make it without any coding knowledge by using CloudApper™. It is a no code application building platform. With this platform, you can make your own customize application according to your project need. You don’t need to worry about integrating biometric with your App, CloudApper comes with biometric functionality out of the box. As soon as you finish building this app ( won’t take too much of your time ) you will be ready for your biometric project.

Bio-plugin-SDK

CloudABIS™

Web API For Biometric Authentication

Key Features:

Simply connect to our Biometric API to perform fast 1:N Fingerprint/Finger-Vein/Iris Recognition

Learn More

I Already Have The App

If you already have an app that does not have biometric functionality, then this step if for you. You need to integrate biometrics with your app – subscribe to CloudABIS™ biometric API. This will make your task super easy. It will take only a few hours to connect with biometric API. CloudABIS is a multimodal matching engine. It supports fingerprint, finger vein, face and iris recognition. It is highly scalable which means you can scale up or down based on your requirement anytime you want. Once the App is connected to CloudABIS, use your Android mobile device to perform fast and reliable 1: N biometric identification.

Need more help? Reach out to us and tell us about your requirements. We are M2SYS, having 17 years expertise in biometric sure to give you the best solution.

 

M2SYS simplifies the development and deployment of biometric projects


Fredric Hoffman

Fredric Hoffman is a digital marketing analyst at M2SYS Technology and a tech enthusiast, he loves analyzing, researching and writing on technology. He believes that adaptation of cutting-edge technology can transform this world into a new shape and make it live worthy for all.

Fredric Hoffman

Digital Marketing Analyst at M2SYS Technology
Bangladesh
View Profile
Fredric Hoffman